How To Get Revenge On Noisy Neigbours Upstairs Or Downstairs

If you live in a flat apartment, or a house, that has very loud and annoying noisy neighbors on the other side of the brick wall, it can be annoying if it is seen as a daily problem to your ears. Usually, having noisy neighbours can be resolved; this is by talking to them and tell them to please keep them volume down on their subwoofers or speakers. If the next day you hear booming loud bass, or screaming loudness from their speakers, it is time you took action! You talking to them about their annoying music didnt give them the message to turn down their music.

So what you need is to buy a high powered amplifier and some loud subwoofers and some horn tweeters. Make sure the amplifier and subwoofers is at least a 1000 watts rms, tuned to 30 Hz, to give their walls a good shake and for the horn tweeters 150 rms watts will do them nicely. Once you have got all that audio gear, place the subwoofers next to the wall that you can hear noise through, do the same with the horn tweeters. Next purchase some ear defenders, for you own safety, put them on your ears and crack up the volume to the loudest level and leave it blasting for 5 minutes. 

After 5 minutes take the ear defenders off your ears, if they raise the volume and continue to blast their music through your walls, then leave it on for another 5 minutes. They will eventually give up because your audio setup is way to loud for them and that will be the end of you noisy neighbours for a long time! 

Read More..

How To Get Free Speed Camera Warnings On Nokia Maps Application Tested On Nokia X6 C6 5233 N8 and 5800

Nokia maps is a excellent application that is installed onto most Nokia symbian mobile phones like the Nokia 5233, 5800, N8, C6 and X6, already from the factory. It is a free application that transforms your ordinary mobile phone into a gps satellite navigation system that gives accurate navigation with good onscreen graphics. These days more and more speed cameras are added to roads across the world, to catch people going above the set speed limit. When you are driving you are concentrating more on the road, so therefore probably you will not watch out for any upcoming speed cameras, if youre using Nokia maps to guide you to your destination. So if you are using Nokia maps on your Nokia mobile phone, it has a built in speed camera warning and warns you on screen when a speed cameras are, if you turn it on, it could prevent points going onto your driving license and getting a fine from the Police.

Instructions:

1)Power on your Nokia mobile phone and run the application called "Nokia Ovi Maps".

2)Once the app has loaded up, select the spanner icon seen in the bottom left cornet, this is by touching it.

3)Then it will give you a list of options you can change, the option that you want to select is called "Safety Spot Warner" and tap it using your finger.

4)It will give you a option to enable safety spot warner, you want to select the "Yes" option.

5)Then click the "Back" option found in the bottom right corner and the select "Menu" in the left bottom corner. This will allow your Nokia mobile phone to exit from the settings menu.

6)You have now enabled speed camera warning and every time you drive past a speed camera, the phones loudspeakers will make a "Bleep" sound to warn you to slow down your car.

Read More..

Neighbours from hell 2 on vacation Game

Download Free Neighbours from hell 2 on vacation Game Full

A1259 Neighbours from hell 2 on vacation

Read More..

How To Fix a CB Radio That Wont Turn On Not Getting No Power

A home base power supply is required to convert the standard 240 volts from a wall socket to 12 volts to power any CB radio up. If you are using your CB radio in your car, there is no need for a separate power supply box to convert the voltages because the car battery provides the correct amount of 12 volts. If your CB radio is not getting no power from its power supply, it will not turn on. There can be many different reasons on why your CB radio is not getting any power, it could be just a simple as replacing a fuse or the power supply can become bad. To help your troubleshoot this particular problem, go through the following steps provided below to help fix your CB radio.

1) Is your CB radio getting 12 volts? Use a multimeter to check the voltage that is coming from its power source. This is vital to find out because if its not getting 12 volts from the power source, you can tell if the power supply or the CB radio is the problem. So setup the multimeter to read in voltage mode, attach the negative probe to the negative wire and the positive probe onto the positive wire connecting into the CB radio. Switch on your power supply, the screen of the multimeter should read around 12 volts. If its displaying 0 volts, at this point you have identified that the CB radio is not getting no power from the power source and the CB radio is not faulty. 

2) Check for any bad or wrong connections. If the wires from the CB radio to the power supply are not connected properly or are short circuiting because the wires are touching each other, both can be possible causes to your CB radio getting no power. Run down the wires from the CB radio to the power supply and look out for any wires that are not taped up and touching each other. Also a CB radio has two wires that are required to be connected to a power source in order to make it function. If the wires are connected with the wrong polarity, so the positive wire is connected to negative and negative wire connected to positive, it will not power on at all. So ensure that they are connected the right way!

3) Check if the fuse is burnt out. A CB radio uses a fuse to protect itself from getting damaged during a power surge or a short circuit. The role of the fuse is to break when the current becomes too much for it to handle. Your CB radio will have its own glass fuse inside a fuse holder, which is found on the positive wire at the back of the rig. The way to identify if the fuse is blown out is by looking in the middle of the fuse, if the small wire looks burnt or has snapped, its the problem causer and needs replacing. Make sure you use the correct glass fuse of the same amps because if the amount of amps the replacement fuse can handle is too less or too much, it wont protect your CB radio from getting damaged next time something goes wrong.

Read More..